5 Tricks for Professionally Finishing the Canvas Edges of Your Paintings

If you’re like me you don’t dig the shocking whiteness of raw canvas edges against the painted front of a finished painting. Who does? Anybody can see that unframed paintings look much better from the front than they do from the side. 

Even worse, during the painting process, bits of the colors that you used on your painting get on the sides and create a “design” element that is jarring against your carefully planned and executed front. This problem seems almost unavoidable unless your’e some kind of crazy neat freak or paint by the numbers artist.  Iv’e always found it extremely difficult to paint without making a mess, hell that’s half the fun. 

unpainted sides

In the past, what the sides looked like didn’t matter as much because everybody knew that a painting wasn’t finished until it was framed. Framing your paintings is still great, but being forced to find frames that fit and really complement your work adds a layer of complication and expense, not to even mention  how aggravating this can be.

Today there are several options that can save you time and money, and allow your unframed works to feel more finished and professional.


Here are 5 suggestions for unframed paintings:


1. The quickest way to make your paintings’ sides look more finished is to use black duct tape to cover your canvas’ sides.

Ideally, you’d do this before you start painting, but you can use this technique on a finished painting whose sides you left white. Its downside is that the black duct tape  isn’t acid-free—which upsets some collectors, and museums, but it’s a good choice for studies and in works you’re planning to  show more casual settings.

There are several things to keep in mind when doing this:

• You don’t have to use one continuous piece of tape, but obviously the fewer seams you have, the better.

• Your tape should be somewhat wider than the side of your canvas so you can wrap the tape over the canvas’ back edge. However, don’t overlap the canvas’ face—or the tape will interfere with your painting’s look and, if you later choose to remove the tape, leave a jarring white place on the painting itself. Ouch!

• Finally, to ensure the tape looks its best, use a hospital fold on the corners (like you do when you are stretching a canvas) and make sure to press the tape down firmly. Also, be diligent to clean off any stray paint that gets on the tape as you’re painting.

2. The cheapest way to finish your paintings’ sides is to paint them black before starting your painting.

black sides

Here are three things to remember if you choose this option:

• Acrylic paint is best for this, no matter what medium you’re using to create your work (acrylic, oils, or watercolor.) It dries quickly and cleans off easily. However, if your canvas is stapled on the side, you should first gesso the sides to prevent rust problems later.

• Avoid letting black paint get on the front of your canvas. If it does, wipe it off immediately to prevent a ridge line showing though your paint. A rag is OK with oils and acrylics, but if you’re using watercolors on canvas, use a Mr. Clean Magic Sponge on the wet paint to ensure that all residue of the acrylic paint is removed from the front of the canvas.

• Neatly clean off any stray paint that mars your black sides. Dry paint is harder to clean off, but if that happens sand the dry paint and carefully touch up the marred area with your black acrylic paint.

3. The most interesting way to finish your painting’s side is to continue painting your subject matter on the canvas sides (best done on deep, gallery-stretched canvases without staples showing on the sides.)

painted sides

Here are three things you should keep in mind when using this technique:

• Don’t forget the bottom. It’s tricky to do this because your canvas sits on the bottom edge, so you might want to wait until the top is dried enough to safely flip the painting onto its top edge so you can work on the bottom edge.

• Use a sketchier painting style on the sides. The sides aren’t the star of your work, so viewers aren’t concentrating on them. Thus, you just need to have enough detail for your viewers’ eyes to “fill in” what they expect to see as they scan from the front to the sides. No need for super accurate detail here.

• You can choose to paint the sides of a narrow-depth canvas, but it won’t look as good as deep-sided canvases will. Furthermore, if the sides have staples showing, you will need to gesso the sides to prevent rust problems later.

4. Always use hanging hardware and bumpers when displaying your work with finished sides.

The top of your canvas really isn’t designed to carry the weight of your painting over the long haul. Instead, place hangers on the canvas’ side stretcher bars (about a hand’s length down from the top.)

And why should you place bumpers on the on the bottom edges of your work? Because they do a great job of helping your paintings stay straight on the wall.

5. If using a shadow-box frame, do finish your painting’s sides in some way.

Yes, the reveal won’t allow the viewers to see much of the edge, but finishing the edges still creates a more professional, finished look.



Connect with me on Twitter (MikeOwensArt) on Twitter


Like me on Facebook @ 

Michael Owens | Promote Your Page Too

, , , , , , ,

No comments yet.

Leave a Reply

Powered by WordPress. Designed by WooThemes